0.5T flow chamber fully premixed steam generator

0.5T flow chamber fully premixed steam generator

Make energy conservation safer, more environmentally friendly, and more efficient

Making Energy Conservation Faster and Smarter

Jiangsu Zhiyuan Boiler Co., Ltd

Product Introduction

Industrial grade steam unit LSS0.5-1.0-Q main engine configuration list

Technical parameters of 0.5T fully premixed steam generator

Note: 1. In terms of fuel consumption, the low heating value of natural gas is calculated at 8600Kcal.

          2. Water quality requirement: TDS ＜ 30ppm.

          3. Gas pressure is 3-8kpa.

This product has successfully overcome the problems of easy blockage and high cleaning frequency of the fully premixed surface combustion head in steam generators, and developed a new stainless steel bridging microporous combustion technology:

1. Pre mixed surface combustion head with extremely low nitrogen oxide emissions.

Stable combustion can be achieved under various working conditions.

3. The flame is short, and there is a small requirement for the thermal capacity of the furnace.

4. Just install a coarse filter, not afraid of dirt and blockage, and particles with a diameter of less than 0.5mm can be discharged on their own.

5. Pneumatic ratio design, with constant oxygen content.

6. Optional single segment and continuous comparison configuration, with high cost performance.

7. The overall stainless steel structure of the combustion head is not easily damaged, safe and durable.

Comparison of metal fiber and bridging microporous technology